30L REATORG TECHNOLOGIES™ JACKETED GLASS REACTOR

Customer: R&D institute
Objective: complectation, manufacture, installation, commissioning and start-up of a glass reactor, thermostat and vacuum pump

Our customer needed in 30L glass reactor with a thermostat and a peristaltic pump. This reactor was planned to be placed in a special safety box so it was important to keep overall height lower than 2700 mm.

 Key features of REATORG TECHNOLOGIES™ reactor system:
·         reactor working volume: 30 L
·         glass upper section: condenser, feed vessel, receive vessel and control station
·         bottom outlet valve without dead volume
·         temperature range: -40 ° С to + 180 ° С
·         pressure range: -0.98 to +0.5 bar
·         borosilicate glass 3.3 European production
·         mobile frame with adjustable tube supports, mobile on wheels with antistatic coating: 304L and 12X18H9TL steel
·         speed control with frequency converter
·         the mixing device is made of PFA coated steel
·         agitator mechanical seal
·         certificates for the composition of materials in contact with the product

Scope of supply:
·         Huber Unistat 410 with Pilot ONE with temperature range -45...250 °C, heating capacity 3 kW и cooling capacity 1,5 kW при 0 °C;
·         Watson Marlow 120S/DV peristaltic pump with Marprene tube;
·         quick-release REATORG TECHNOLOGIES™ thermal insulation designed to reduce heat losses, made of silicone-coated glass fabric, thermal insulation layer - 50 mm, mineral wool based on basalt fibers peristaltic pump with speed 200 rpm.

Equipment used in the project:
·         REATORG TECHNOLOGIES™ standard jacketed glass reactors
·         Thermostats