The CAMAG TLC Spray Cabinet 2 ensures the complete removal of reagent mist while manually spraying onto TLC plates with the CAMAG Glass Reagent Sprayer or the CAMAG TLC Sprayer.
There is no deflection of the spray mist before it reaches the plate, an effect often encountered in a normal laboratory fume hood. Particles rebounding from the plate are completely removed. The TLC Spray Cabinet 2 is also useful for drying plates after development, with or without the assistance of a hair dryer.
The cabinet is made of PVC. The blower, a radial fan driven by a motor outside of the fume duct, produces an airflow of 130 cubic feet (3,7 cubic meter) per minute. The bottom of the TLC Spray Cabinet has a built in tray, which is removable for easy cleaning.
You can purchase additional accessories to CAMAG TLC Spray Cabinet 2:
022.6232 CAMAG TLC Spray Cabinet 2 PVC, without blower for connection to existing forced flow conduit with 1,5 m flexible exhaust hose 127 mm diameter
022.6226 Exhaust hose extension 1,5 m with adapter
022.6230 CAMAG TLC Spray Cabinet 2 PVC
blower 230 V
flexible exhaust hose 1,5 m
There is no deflection of the spray mist before it reaches the plate, an effect often encountered in a normal laboratory fume hood. Particles rebounding from the plate are completely removed. The TLC Spray Cabinet 2 is also useful for drying plates after development, with or without the assistance of a hair dryer.
The cabinet is made of PVC. The blower, a radial fan driven by a motor outside of the fume duct, produces an airflow of 130 cubic feet (3,7 cubic meter) per minute. The bottom of the TLC Spray Cabinet has a built in tray, which is removable for easy cleaning.
You can purchase additional accessories to CAMAG TLC Spray Cabinet 2:
022.6232 CAMAG TLC Spray Cabinet 2 PVC, without blower for connection to existing forced flow conduit with 1,5 m flexible exhaust hose 127 mm diameter
022.6226 Exhaust hose extension 1,5 m with adapter
Дериватизатор CAMAG с камерой для пластин 20x20 см - это автоматическое распылительное устройство для нанесения реагентов на планшеты ТСХ/ВЭТСХ
Нагреватель CAMAG TLC Plate Heater 3 предназначен для работы с ТСХ/ВЭТСХ пластинами для равномерного нагрева при заданной температуре после окрашивания.
Устройство для погружения CAMAG Chromatogram Immersion Device 3 используется для автоматического погружения пластин ТСХ/ВЭТСХ с постоянной вертикальной скоростью в растворы