30L REATORG TECHNOLOGIES™ JACKETED GLASS REACTOR

REATORG completed the equipment selection, manufacture, installation, commissioning and start-up of a glass reactor, thermostat and vacuum pump for a research institute.

Our customer needed in 30L glass reactor with a thermostat and a peristaltic pump. This reactor was planned to be placed in a special safety box so it was important to keep overall height lower than 2700 mm.

Key features of REATORG TECHNOLOGIES™ reactor system:
• reactor working volume: 30 L
• glass upper section: condenser, feed vessel, receiving vessel and control station
• bottom outlet valve without dead volume
• temperature range: -40 ° С to + 180 ° С
• pressure range: -0.98 to +0.5 bar
• borosilicate glass 3.3 European production
• mobile frame with adjustable tube supports, mobile on wheels with antistatic coating: 304L and 12X18H9TL steel
• speed control with frequency converter
• the mixing device is made of PFA coated steel
• agitator mechanical seal
• certificates for the composition of materials in contact with the product

Scope of supply:
• Huber Unistat 410 with Pilot ONE with temperature range -45...250 °C, heating capacity 3 kW и cooling capacity 1,5 kW при 0 °C;
• Watson Marlow 120S/DV peristaltic pump with Marprene tube;
• quick-release REATORG TECHNOLOGIES™ thermal insulation designed to reduce heat losses, made of silicone-coated glass fabric, thermal insulation layer - 50 mm, mineral wool based on basalt fibers peristaltic pump with speed 200 rpm.

Equipment used in the project:
• REATORG TECHNOLOGIES™ standard jacketed glass reactors
• Thermostats